Programming New Clifford Arrow 5.1 Remotes

Clifford Arrow remotes can be added with the auto learn feature:

1. Disarm the system
2. Turn the key in the ignition to the 1st position
3. Locate the valet switch (small two button control pad usually under the dash)
4. Press the star button twice
5. Press plain button once
6. Press and hold the star button until the siren chirps and status LED turns on
7. Press the plain button once - the siren will chirp after a gap
8. Press the star button once - the siren will chirp instantly
9. On the new remote press the lock / unlock button once

A confirmation chirp is heard from the siren and your new remote is now active.

Return to Arrow 5.1 Clifford Car Alarms system information.

Last updated - September 2016