Viper Two-Way Car Alarm

The Viper two-way car alarm is capable of sending and receiving commands to and from your vehicle via the LCD remote. This system incorporates all the features of the Viper 586vi with a full LCD screen of information in your hand.

586vi + 863v car security fitted from £999* (see notes below)

Pager Remote Car Alarm

This system is similar to a pager remote car alarm with all alarm triggers being sent to the LCD screen. So long as the vehicle is within a distance, the screen on the remote control will show information about the alarm and vehicle status. The range on these devices is excellent, but customers should be aware that the ability to communicate is affected by obstacles such as buildings and electronic interference, and that we in the UK have many more obstacles than in the US.

As this system is all about the hand held remote, a function list is given in the table below. The Viper 586vi comes with one LCD remote (863v) and one basic one-way remote (861v). Realistically the back-up remote will allow the alarm to function with the same security but will not give vehicle details, and customers should expect to source a new remote if the LCD one becomes lost or broken. The back-up remote also allows the system to be disabled to programme in a new remote.

This device is also SmartStart compatible should customers also opt to have this system installed at the same time.

Although this is an excellent security device it is not and insurance approved product and therefore this system is unlikely to gain insurance discounts.

Viper 863v Remote Control Functions

The Viper 586vi is all about the LCD two-way remote. There are two main buttons on the front and three buttons on the side, allowing the function press to give levels one, two and three, by repeated presses. The current level is shown in the text field at the bottom of the LCD screen.

Viper 5863vi LCD Remote Control Functions
	Armed: System is Armed, alarm is enabled
	Locked: System is Locked in Valet, alarm is disabled
	Disarmed: System is Disarmed, alarm is disabled
	Unlocked: System is Unlocked in Valet, alarm is disabled
	Siren disabled for sensor triggers (sensor Silent Arm)
	Siren is disabled for all triggers (full Silent Arm)
	Remote Start is active, engine is running
	Timer Remote Start is active
	SmartStart is on
	Manual transmission - the engine can be started
	Vehicle interior temperature
	Defogger on
	On during Warn Away and full trigger output
	Aux/Boot activation (if fitted)
	Boot open therefore bypassed when arming
	On during a sensor zone full trigger output
	On indicates a sensor is active and bypassed when arming
	On during door zone full trigger output
	On indicates a door is open and bypassed when arming
	On during bonnet zone full trigger output
	On indicates the bonnet is open and bypassed when arming
	Battery level
	You are transmitting to the vehicle
	You are receiving from the vehicle
	Out of range from vehicle
	Pager on - remote is listening for messages
	Pager off - remote will not wake up to listen for messages
	Remote vibrates when messages received
	Remote Beeps and Tones when messages received
Text Field	Clock, Runtime, Temperature, Level indicator etc

* Extra Parts and Labour will incur a reasonable additional charge for some vehicles.

See a closer look at the remote itself in this You Tube video on how to pair the Viper 5863vi LCD pager remote.

Alternative products:

View the Clifford Smartstart system compatible with all Viper Engine Remote Start alarms.

View the 5861vi Viper Car Alarm ideal for customers expecting the use Clifford Smartstart from installation.

We can fit your Viper 5863vi pager alarm with remote start near Fareham for Guildford, Woking, Hampshire, Andover, Basingstoke, Winchester, Southampton, Bournemouth, Farnham, Aldershot, Farnborough, Hindhead, Liss, Horsham, Midhurst, Chichester and West Sussex customers.